ZET1 - Frost CVDA

ZET walk-over in ground uplighter with fixed and adjustable optic utilized high-performance LED with additional glare control accessory to deliver the best and comfortable light distribution. ZET Adjustable is available in COB LED or High Power LED with various beam angle option. It is supplied with a post-cured silicone gasket with pre-wire cable for outdoor use. ZET is commonly used to highlight architectural tasks, wall structures, low ceilings, and columns. The glare-shield honey comb and softening lens are available as accessories. A gel-filled IP68 connection device for water tight connection is also available as standard option. Retrofit solution with GU5.3 or GU10 Led lamp base is presented in this family. The installation of this product and drainage system must be done according to the product’s manual.


 New Ordering Code : 9002-0-7-586-91 
Lamp : LED Socket : N/A Wattage : 12 W Beam : N/A Lumen : 210 lm CCT : 2700 K Controller : Remote driver On-Off / DALI
ZET1 - Frost CVDA
ZET1 - Frost CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9002-0-7-583-91 
Lamp : LED Socket : N/A Wattage : 16 W Beam : N/A Lumen : 300 lm CCT : 2700 K Controller : Remote driver On-Off / DALI
ZET1 - Frost CVDA
ZET1 - Frost CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9002-0-7-587-91 
Lamp : LED Socket : N/A Wattage : 12 W Beam : N/A Lumen : 210 lm CCT : 3000 K Controller : Remote driver On-Off / DALI
ZET1 - Frost CVDA
ZET1 - Frost CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9002-0-7-584-91 
Lamp : LED Socket : N/A Wattage : 16 W Beam : N/A Lumen : 300 lm CCT : 3000 K Controller : Remote driver On-Off / DALI
ZET1 - Frost CVDA
ZET1 - Frost CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9002-0-7-588-91 
Lamp : LED Socket : N/A Wattage : 12 W Beam : N/A Lumen : 230 lm CCT : 4000 K Controller : Remote driver On-Off / DALI
ZET1 - Frost CVDA
ZET1 - Frost CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9002-0-7-585-91 
Lamp : LED Socket : N/A Wattage : 16 W Beam : N/A Lumen : 330 lm CCT : 4000 K Controller : Remote driver On-Off / DALI
ZET1 - Frost CVDA
ZET1 - Frost CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.

Similar Products