ZET1 - Clear CVDA

ZET walk-over in ground uplighter with fixed and adjustable optic utilized high-performance LED with additional glare control accessory to deliver the best and comfortable light distribution. ZET Adjustable is available in COB LED or High Power LED with various beam angle option. It is supplied with a post-cured silicone gasket with pre-wire cable for outdoor use. ZET is commonly used to highlight architectural tasks, wall structures, low ceilings, and columns. The glare-shield honey comb and softening lens are available as accessories. A gel-filled IP68 connection device for water tight connection is also available as standard option. Retrofit solution with GU5.3 or GU10 Led lamp base is presented in this family. The installation of this product and drainage system must be done according to the product’s manual.


 New Ordering Code : 9011-A-7-586-91 
Lamp : LED Socket : N/A Wattage : 12 W Beam : 12° Lumen : 870 lm CCT : 2700 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0405-0-9-000-00
Honey Comb Louver (pre-assembled from factory)
0406-0-9-000-00
Softening Filter (pre-assembled from factory)
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-C-7-586-91 
Lamp : LED Socket : N/A Wattage : 12 W Beam : 30° Lumen : 670 lm CCT : 2700 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0405-0-9-000-00
Honey Comb Louver (pre-assembled from factory)
0406-0-9-000-00
Softening Filter (pre-assembled from factory)
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-D-7-586-91 
Lamp : LED Socket : N/A Wattage : 12 W Beam : 52° Lumen : 600 lm CCT : 2700 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0405-0-9-000-00
Honey Comb Louver (pre-assembled from factory)
0406-0-9-000-00
Softening Filter (pre-assembled from factory)
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-K-7-586-91 
Lamp : LED Socket : N/A Wattage : 12 W Beam : Asymmetric Lumen : 730 lm CCT : 2700 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-Q-7-797-91 
Lamp : LED Socket : N/A Wattage : 11 W Beam : Sharp Elliptical V Lumen : 160 lm CCT : 2700 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-A-7-583-91 
Lamp : LED Socket : N/A Wattage : 16 W Beam : 12° Lumen : 1220 lm CCT : 2700 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0405-0-9-000-00
Honey Comb Louver (pre-assembled from factory)
0406-0-9-000-00
Softening Filter (pre-assembled from factory)
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-C-7-583-91 
Lamp : LED Socket : N/A Wattage : 16 W Beam : 30° Lumen : 940 lm CCT : 2700 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0405-0-9-000-00
Honey Comb Louver (pre-assembled from factory)
0406-0-9-000-00
Softening Filter (pre-assembled from factory)
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-D-7-583-91 
Lamp : LED Socket : N/A Wattage : 16 W Beam : 52° Lumen : 850 lm CCT : 2700 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0405-0-9-000-00
Honey Comb Louver (pre-assembled from factory)
0406-0-9-000-00
Softening Filter (pre-assembled from factory)
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-K-7-583-91 
Lamp : LED Socket : N/A Wattage : 16 W Beam : Asymmetric Lumen : 1020 lm CCT : 2700 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-Q-7-759-91 
Lamp : LED Socket : N/A Wattage : 16 W Beam : Sharp Elliptical V Lumen : 240 lm CCT : 2700 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-A-7-587-91 
Lamp : LED Socket : N/A Wattage : 12 W Beam : 12° Lumen : 870 lm CCT : 3000 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0405-0-9-000-00
Honey Comb Louver (pre-assembled from factory)
0406-0-9-000-00
Softening Filter (pre-assembled from factory)
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-C-7-587-91 
Lamp : LED Socket : N/A Wattage : 12 W Beam : 30° Lumen : 670 lm CCT : 3000 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0405-0-9-000-00
Honey Comb Louver (pre-assembled from factory)
0406-0-9-000-00
Softening Filter (pre-assembled from factory)
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-D-7-587-91 
Lamp : LED Socket : N/A Wattage : 12 W Beam : 52° Lumen : 600 lm CCT : 3000 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0405-0-9-000-00
Honey Comb Louver (pre-assembled from factory)
0406-0-9-000-00
Softening Filter (pre-assembled from factory)
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-K-7-587-91 
Lamp : LED Socket : N/A Wattage : 12 W Beam : Asymmetric Lumen : 730 lm CCT : 3000 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-Q-7-798-91 
Lamp : LED Socket : N/A Wattage : 11 W Beam : Sharp Elliptical V Lumen : 160 lm CCT : 3000 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-A-7-584-91 
Lamp : LED Socket : N/A Wattage : 16 W Beam : 12° Lumen : 1220 lm CCT : 3000 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0405-0-9-000-00
Honey Comb Louver (pre-assembled from factory)
0406-0-9-000-00
Softening Filter (pre-assembled from factory)
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-C-7-584-91 
Lamp : LED Socket : N/A Wattage : 16 W Beam : 30° Lumen : 940 lm CCT : 3000 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0405-0-9-000-00
Honey Comb Louver (pre-assembled from factory)
0406-0-9-000-00
Softening Filter (pre-assembled from factory)
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-D-7-584-91 
Lamp : LED Socket : N/A Wattage : 16 W Beam : 52° Lumen : 850 lm CCT : 3000 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0405-0-9-000-00
Honey Comb Louver (pre-assembled from factory)
0406-0-9-000-00
Softening Filter (pre-assembled from factory)
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-K-7-584-91 
Lamp : LED Socket : N/A Wattage : 16 W Beam : Asymmetric Lumen : 1020 lm CCT : 3000 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-Q-7-760-91 
Lamp : LED Socket : N/A Wattage : 16 W Beam : Sharp Elliptical V Lumen : 240 lm CCT : 3000 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-A-7-588-91 
Lamp : LED Socket : N/A Wattage : 12 W Beam : 12° Lumen : 930 lm CCT : 4000 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0405-0-9-000-00
Honey Comb Louver (pre-assembled from factory)
0406-0-9-000-00
Softening Filter (pre-assembled from factory)
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-C-7-588-91 
Lamp : LED Socket : N/A Wattage : 12 W Beam : 30° Lumen : 720 lm CCT : 4000 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0405-0-9-000-00
Honey Comb Louver (pre-assembled from factory)
0406-0-9-000-00
Softening Filter (pre-assembled from factory)
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-D-7-588-91 
Lamp : LED Socket : N/A Wattage : 12 W Beam : 52° Lumen : 650 lm CCT : 4000 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0405-0-9-000-00
Honey Comb Louver (pre-assembled from factory)
0406-0-9-000-00
Softening Filter (pre-assembled from factory)
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-K-7-588-91 
Lamp : LED Socket : N/A Wattage : 12 W Beam : Asymmetric Lumen : 780 lm CCT : 4000 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-Q-7-799-91 
Lamp : LED Socket : N/A Wattage : 11 W Beam : Sharp Elliptical V Lumen : 170 lm CCT : 4000 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-A-7-585-91 
Lamp : LED Socket : N/A Wattage : 16 W Beam : 12° Lumen : 1320 lm CCT : 4000 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0405-0-9-000-00
Honey Comb Louver (pre-assembled from factory)
0406-0-9-000-00
Softening Filter (pre-assembled from factory)
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-C-7-585-91 
Lamp : LED Socket : N/A Wattage : 16 W Beam : 30° Lumen : 1020 lm CCT : 4000 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0405-0-9-000-00
Honey Comb Louver (pre-assembled from factory)
0406-0-9-000-00
Softening Filter (pre-assembled from factory)
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-D-7-585-91 
Lamp : LED Socket : N/A Wattage : 16 W Beam : 52° Lumen : 910 lm CCT : 4000 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0405-0-9-000-00
Honey Comb Louver (pre-assembled from factory)
0406-0-9-000-00
Softening Filter (pre-assembled from factory)
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-K-7-585-91 
Lamp : LED Socket : N/A Wattage : 16 W Beam : Asymmetric Lumen : 1090 lm CCT : 4000 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.
 New Ordering Code : 9011-Q-7-796-91 
Lamp : LED Socket : N/A Wattage : 16 W Beam : Sharp Elliptical V Lumen : 250 lm CCT : 4000 K Controller : Remote driver On-Off / DALI
ZET1 - Clear CVDA
ZET1 - Clear CVDA

Accessories

0396-0-9-000-00
Gel-Filled IP68 Connector for Through Wiring Cable Diameter 6.5 - 12mm. for dimming interface
0445-0-9-000-00
LED Constant Voltage Driver 24Vdc 150W.
0446-0-9-000-00
LED Constant Voltage Driver 24Vdc 40W.

Similar Products